joao nunes sampaio

Assistant Professor at the University of Aveiro since 2009, and I also  teach at the Polytechnic Institute of Cávado and Ave (IPCA) since 2015.  I'm also a researcher for the Research Institute for Design, Media and Culture [ID ] where I´ve been developing studies focusing on co-design methods and collaborative tools for design practice for product and service development.

Along with that, i´m a designer holding a PhD with the thesis "Narrative and visualization - Strategies for effectiveness in collaborative design practice".

Current positions

  • Professor Auxiliar Convidado UA + IPCA

Publications

Books
  • bysteel dst group (2019). bysteel: Circular Design Workshop bysteel: industrial waste transformation . ISBN 978-989-209906
  • Franqueira, T., J. Sampaio, E. Oliveira, C. Pereira, A. Kumagai, ‘Designing with Cork – Bringing the Industry into the Design Studio Classroom’, Materials Research Proceedings, Vol. 3, pp 19-26, 2017. DOI: http://dx.doi.org/10.21741/9781945291418-3
  • Franqueira, T., & Sampaio, J. (Eds.). (2014). Cumulus Aveiro On-line Proceedings : What’s on: cultural diversity, social engagement and shifting education . Aveiro: Universidade de Aveiro. ISBN 978-989-98185-1-4. Retrieved from http://www.cumulusassociation.org/cumulus-aveiro-on-line-proceedings/
  • Franqueira, Teresa; Sampaio, João (2014) – Cumulus- International Association of Universities and Colleges of Art, Design and Media. Cumulus Conference on Aveiro – What’s on: cultural diversity, social engagement, shifting education. University of Aveiro, Portugal, 2014. ISBN 978-989-981185-1-4.
  • Sampaio, João, & Reis, Miriam. (Eds.). (2012). Livro de Actas, UD’12 – 1º Encontro Nacional de Doutoramentos em Design. Aveiro: Universidade de Aveiro. ISBN 978-989-20-3421-8. Link
Book chapters
  • Terroso, M. Moreno, A., Amorim, N., Palmares, H. & Sampaio, J.(2018). Immersive Business Simulation in Footwear Design Education: A bridge for reality, in Broega et al. (Eds) Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress, CRC Press, Taylors & Francis ISBN 978-1-138-37011-1
  • Sampaio, J., Baganha, A., Gomes, F. & Terroso, M. (2018). Bounding fields of knowledge: co-designing regional pottery of the Cávado sub-region as a strategic potential of museological differentiation and product development, in Broega et al. (Eds) Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress, CRC Press, Taylors & Francis ISBN 978-1-138-37011-1
  • Sampaio, J., Baganha, A., Gomes, F. & Terroso, M. (2018). Bounding fields of knowledge: co-designing regional pottery of the Cávado sub-region as a strategic potential of museological differentiation and product development, in Broega et al. (Eds) Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress, CRC Press, Taylors & Francis ISBN 978-1-138-37011-1
  • Terroso, M. Moreno, A., Amrim, N., Palmares, H. & Sampaio, J.(2018). Immersive Business Simulation in Footwear Design Education: A bridge for reality, in Broega et al. (Eds) Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress, CRC Press, Taylors & Francis ISBN 978-1-138-37011-1
International journals
  • Terroso, M. Moreno, A., Amorim, N., Palmares, H., Matos, D. & Sampaio, J.(2019). Focus on process and outcome in footwear design education, in Procedia CIRP , Elsevier B.V. DOI: https://doi.org/10.1016/j.procir.2019.04.316
  • Matos, D., Terroso & Sampaio, J. (2019). The Growing Path in search of an Industrial Design Identity, in Procedia CIRP , Elsevier B.V. DOI: https://doi.org/10.1016/j.procir.2019.05.017
  • Sampaio, J.,Terroso, M. & Matos, D. (2019). Regional potter interpretations: Case Study of synergic outcomes in product design Master Education, in Procedia CIRP , Elsevier B.V. DOI: https://doi.org/10.1016/j.procir.2019.04.292
  • Franqueira, T.; Sampaio, J. (2015). Design Workshops for Social Innovation. International Journal of Knowledge Engineering and Management vol. 4, n. 10. 2015. PP 53-68. International Journal Knowledge of Engineering and Management. University Federal of Santa Catarina. Brazil. NOV. 2015/FEV. 2016. http://incubadora.periodicos.ufsc.br/index.php/IJKEM/issue/view/514 ISSN 2316-6517
International conferences
  • Rocha, C., Camocho, D.,Alexandre, J. , Schmidt, K., Celades, I. , Ros, T., Kalleitner-Huber, M. ,Hernaez, O. , Atin, E. , Pamminger, R., Schmidt, S., Sampaio, J , Afonso, A., Mulet, H., Ruiz, L. (2019) KATCH_e: Training materials and tools for circular economy in practice, in: ERSCP 2019 Circular Europe for Sustainability: Design, Production and Concuption, Barcelona Espanha, 15 al 18 de outubro de 2019
  • Matos, D., Sampaio, J., Cruz, G. & Terroso, M. (2019). Projeto Bysteel – Circular Design” in Foro de Innovación Docente 2019., in: 8º Encuentro BID de Enseñanza y Diseño, Central de Diseño de Matadero Madrid (Madrid, Espanha), 20 al 22 de novembro de 2019
  • Fernandes, S., Esteves, J. Simões, R., Sampaio, J. (2018). Design do cinto de segurança automóvel: minimização do risco de ferimentos graves e fatais nos condutores seniores . Poster Presented at 6º EIMAD – Encontro de Investigação em Música, Artes e Design, Escola Superior de Artes Aplicadas, Instituto Politécnico de Castelo Branco, Portugal
  • Sampaio, J.; Baganha, A.; Gomes, F.; Terroso, M.: Bounding Fields of Knowledge: Co-Designing Regional Pottery of the Cávado Sub-Region as a Strategic Potential of Museological Differentiation and Product Development.In Proc. CIMODE 2018 Madrid – 4th International Fashion and Design Congress, Espanha, Maio, 2018. (Full paper)
  • Terroso, M. Moreno, A., Amrim, N., Palmares, H. & Sampaio, J. (2018). Immersive Business Simulation in Footwear Design Education: A bridge for reality, in: Proceedings CIMODE 2018: 4º Congresso Internacional de Moda e Design, 21 a 23 de maio de 2018, Madrid, isbn:978‐989-54168-0‐6
  • Terroso, M.; Moreno, A.; Amorim, N.; Palmares, H.; Sampaio, J.: Immersive Business Simulation in Footwear Design Education: A Bridge for Reality. In Proc. CIMODE 2018 Madrid – 4th International Fashion and Design Congress, Espanha, Maio, 2018. (Full paper)
  • Fernandes, S., Esteves, J. Simões, R., Sampaio, J. (2017). Design do cinto de segurança automóvel: minimização do risco de ferimentos graves e fatais nos condutores seniores . Presented at VI Ergotrip Design – Design, Ergonomia & Interação Humano-Computador . Aveiro – Portugal
  • Sampaio, J., Franqueira, T., Ferreira Dias, M., Amorim, M. & Ávila, L. (2017). Co-design Workshops: Methods and tools for Social Entrepreneurship with Local Communities . Presented at the Ciem 2017 – Conferência Ibérica de Empreendedorismo, 9 de junho de 2017, Ofir.
  • Fernandes, S., Esteves, J. Simões, R. & Sampaio, J. (2016). Ergodesign: Análise visual do comportamento de entrada e saída de automóveis por condutores seniores. Presented at 5th Ergotrip Design – Design, Ergonomia & Interacção Humana-Computador. Natal – Rio Grande do Norte – Brasil.
  • Franqueira, T. & Sampaio, J. (2015). Design Workshops for Social Innovation. Presented at IV International Conference on Design, Engineering, Management for innovation – IDEMi 2015. Florianópolis, Brazil. Retrieved from http://incubadora.periodicos.ufsc.br/index.php/IJKEM/issue/view/514/showToc\
  • Franqueira, T., Sampaio, J., & Tavares, M. (2015). Multidisciplinary Workshops for Social Innovation. In J. Ma, D. Fassi, & L. Yongqi, (pp. 25–33). Presented at the Emerging Practices Inquiry into the Developing, Shanghai. ISBN 978-7-5608-6031-2
  • Franqueira, T.; Sampaio, J. (2015). Design Methodologies and Tools used in Workshops for Social Innovation. ASDR2015 INTERPLAY Brisbane Australia Proceedings Publication ISBN: 978-0-646-94318-3 http://eprints.qut.edu.au/91449/1/IASDR_Proceedings_Final_Reduced.pdf IASDR 2015 – International Association of Societies of Design Research Conference. Brisbane 2-5 NOVEMBER 2015 https://iasdr2015.com/
  • Franqueira, T.; Sampaio, J. (2015). Design Workshops for Social Innovation. International Journal of Knowledge Engineering and Management vol. 4, n. 10. 2015. PP 53-68. IJKEM – University Federal of Santa Catarina. Brazil. NOV. 2015/FEV. 2016 ISSN 2316-6517http://incubadora.periodicos.ufsc.br/index.php/IJKEM/issue/view/514 ISSN 2316-6517
  • Franqueira, T.; Sampaio, J. (2015). Design Workshops for Social Innovation. IV International Conference on Design, Engineering, Management for innovation – IDEMi 2015 Florianópolis, Santa Catarina. Brazil. ISBN: 978-85-8302-061-5 http://limonadadesign.com.br/idemi2015/trabalhos1.html IDEMi 2015 – IV International Conference on Design, Engineering, Management for innovation. Florianópolis 7-10 October 2015 http://www.idemi2015.udesc.br/
  • Franqueira, T.; Sampaio, J.; Tavares, M. (2015). Multidisciplinary Workshops for Social Innovation. Proceedings Emerging Practices Conference 2015 PP25-33 Ma, Jin, Davide Fassi, and Yongqi Lou, eds. Emerging Practices: Inquiry into the Developing. Shanghai: Tongji University Press, 2015. ISBN: 978-7-5608-6031-2 Emerging Practices: Design Research and Education Conference. Shanghai 15–16 OCTOBER 2014 http://tjdi.tongji.edu.cn/NewsDetail.do?ID=3349&lang=_en
  • SAMPAIO, João; FRANQUEIRA, Teresa (2012) – “Approach to design practise based on collaborative platforms” Cumulus Helsinki Conference 2012, Helsínquia. URL: http://cumulushelsinki2012.org/cumulushelsinki2012.org/wp-content/uploads/2012/05/Approach-to- design-practice-based-on-collaborative-platforms.pdf
  • GOMES, Gonçalo; SAMPAIO, João; REIS, Miriam; SILVA, Marta; FRANQUEIRA, Teresa (2011) – (Re)designing a tradicional product – Design strategies for the development of yellow codfish products and its positioning in gourmet markets; DPPI’11- Designing Pleasurable Products and Interfaces; Jun 2011, Milano
See all 17 international conferences
National conferences
  • Ávila, L., Amorim, M., Dias, M., Franqueira, T., Sampaio, J., (2016). Opportunities for engagement of universities in social entrepreneurship and innovation: a pilot experience in Aveiro. Revista Lusófona de Economia e Gestão das Organizações. n. 3 (pp 33-52): Livro de atas sobre workshop APDR. ISSN: 2183-5845
  • Sampaio, J., & Franqueira, T. (2013). Estratégias colaborativas e ferramentas operativas para a prática do design: Matriz de análise e avaliação de casos de estudo, (pp. 133-144) . UD’13 – 2º Encontro Nacional de Doutoramentos em Design. Porto, Portugal
  • Sampaio, J., & Franqueira, T. (2012). Estratégias e ferramentas colaborativas para a prática do design: Desenvolvimento de propostas para a mobilidade urbana sustentável, (pp. 125-134) . UD’12 – 1º Encontro Nacional de Doutoramentos em Design, 14 de Julho, 2012 . Aveiro, Portugal
  • SAMPAIO, João; FRANQUEIRA, Teresa (2012) – “Estratégias e ferramentas colaborativas para a prática do design – desenvolvimento de propostas para a mobilidade urbana sustentável.” Encontro Nacional Doutoramentos em Design, Aveiro
Other publications
  • Sampaio, J. (2019) Short Advance international course “Case Study of Pottery synergic outcomes in master’s in design and Product Development” Master in Collaborative and Industrial Design” in International Short Advanced Course in Product Design – Ceramics Caldas da Rainha School of Arts and Design Polythecnic of Leiria, 18 a 21 Fevereiro, 2020
  • Sampaio, J. (2019) Radical innovation and collaborative design processes”, in Katch_e MOOC https://www.katche.eu/knowledge-platform/katch_e-mooc/radical-innovation-and-collaborative-design-processes/ Link
  • Sampaio, J. (2018) Sustentabilidade, Ensino do Design IPCA: Caso Prático. Conferência “Rethinking Design”, GreenFest’18. Pequeno Auditório do Forum Braga, 1 de Junho, 2018
  • Fernandes, S., Esteves, J. Simões, R., Sampaio, J. (2018). Design do cinto de segurança automóvel: minimização do risco de ferimentos graves e fatais nos condutores seniores . Poster Presented at 6º EIMAD – Encontro de Investigação em Música, Artes e Design, Escola Superior de Artes Aplicadas, Instituto Politécnico de Castelo Branco, Portugal
  • Sampaio, J., Afonso, A. (2019). Innovation through circular economy: Tool development for multidisciplinary approach to product-service-system Design . Poster Presented at 1ª Ed. do Teaching & Learning- Fórum de Ensino & Aprendizagem@UA, Aveiro, Portugal. 18 Junho, 2019
  • Sampaio, J. (2018). Orador na Conferência “Rethinking Design”, GreenFest’18, Comunicação “Sustentabilidade: Ensino Design IPCA, Caso Prático Auditório do Forum Braga, 1 de Junho, 2018
  • Sampaio, J. (2017). Orador no evento XS Design – Conversa “Design na UA” com Francisco Providência, Vasco Branco, João Sampaio, Marta «Complexo CCCI Universidade de Aveiro, 24 de Março, 2017
  • Sampaio, J. (2016). Orador no evento Ciência 2016 – Encontro com a Ciência e Tecnologia, sessão Design para a inovação. Comunicação “Design Colaborativo e Inovação Social” Centro de Congressos de Lisboa, 5 de Julho 2016 Sampaio, J. (2016). MeDES Narrativa e visualização: Estratégias para a eficácia na prática do design colaborativo. Poster Presented at 6º Encontro BID Centros de Ensino Ibero-Americanos de Design, 23 Novembro, 2015. Madrid, Espanha.
  • Sampaio, J. (2015). Narrativa e visualização: Estratégias para a eficácia na prática do design colaborativo. Poster Presented at 6º Encontro BID Centros de Ensino Ibero-Americanos de Design, 23 Novembro, 2015. Madrid, Espanha.
  • Franqueira, T.; Amorim, M.; Dias, M.; Sampaio, J. (2015). Poster: Design & Management Workshops for Social Innovation. Poster Presented at Teaching Day- 4º Edition. Aveiro, Portugal. 2 December 2015.

Scientific, artistic and cultural production

Prototypes
  • Sampaio, J., Marques, D., Gomes, G. et all (2019) Projecto de uma vending machine de botijas de gás. Julho 2018 – Julho 2019
Patents
  • Gomes, O., Sampaio, J., Oliveira, J. (2019) Dispositivo para estimulação olfativa de pacientes com autismo Data do depósito: 2019/12/05 Nº. do pedido: 115956
Technical work
  • Sampaio, J. (2018). Local Coordinator – KATCH_e – Knowledge Alliance on Product-Service Development towards Circular Economy and Sustainability in Higher Education Acronym: KATCH_e Dates: from jan. 2017 to dec.2019 Program: ERASMUS +, KA2: Cooperation for innovation and the exchange of good practices – Knowledge Alliances, Call: EAC/04/2015 Status: On going Tota requestedl: 999.951,00 € Universidade de Aveiro: 74.861,00€ Partners: Portugal – LNEG; Amorim Cork Composites; Universidade de Aveiro (DeCivil, Department of Civil Engineering; DEGEIT, Department of Economics, Management, Industrial Engineering and Tourism; DAO, Department of Environment and Planning; DQ, Department of Chemistry; DeCA, Department of Communication and Art. – Local Coordinator – João Sampaio). Spain – Instituto de Tecnología Cerámica; Prospektiker; Universitat Jaume I de Castellon. Austria – Technische Universitaet Wien; Österreichisches; Ökologie-Institut Doka Gmbh. Denmark – Aalborg Universitet; Højer Møbler A/S; Lebana; Roofeco System S.L..
  • Sampaio, J. (2015). Mentor no Competências Empreendedoras de Base Tecnológica, CEBT Ibérico 2015, Promovido por Universidade de Coimbra, Universidade da Beira Interior, Universidade de Aveiro, CEC (Conselho Empresarial do Centro), Fundación General de la Universidad de León y la Empresa, Fundación General de la Universidad de Salamanca, Fundación General de la Universidad de Valladolid e Universidad Pontificia de Salamanca. Campus Santiago, AVeiro Setembro de 2015.
International awards
  • Paredes “Art on Chairs” (2014) RegioStars Award [Smart Growth – SME Innovation] European Commission. ID+ team involved: [commissioners] Francisco Providência, Heitor Alvelos, Teresa Franqueira, Vasco Branco [technical team] Álvaro Sousa, Gonçalo Gomes, João Sampaio, Jorge Pereira, Paulo Bago D’Uva, Rui Costa. Promoted by the City Hall of Paredes – Furniture Route – 2010/2013. Financed- European Union; QREN; ON.2.
Other relevant cultural production
  • Sampaio, J. (2018) Exposição: Convergência, divergência e paralelismo: Olaria Regional da sub-região do Cávado: Setembro a Dezembro 2018
Other scientific activity spreading actions
  • Rocha, C., Camocho, D., Sampaio, J. et all (2019) KATCH_e National Workshop the Circular Design Workshop organised by the KATCH_e Knowledge Alliance at Circular Design Conference, UPC (Universitat Politècnica de Catalunya), 14 outubro 2019
  • Schmidt, K. and Sampaio, J. (2019) KATCH_e International Workshop: Integrating circular economy in engineering education through playing the KATCH Up! board game at SEFI 2019 Conference, Budapeste, 16 setembro 2019
  • Sampaio, J. (2019) CE Journey . Ferramenta processual, https://www.katche.eu/knowledge-platform/tools-and-training-materials/katch_e-tools/ce-journey/
  • Sampaio, J., Cruz, G., Matos, D. (2018) Projecto Waste UP – GreenFest’18 , espaço expositivo da exposição, Forum Braga, 1 a 3 Junho, 2018

Projects